Kaiyodo Toy Story Emperor Zurg 海洋堂 反斗奇兵 索克天王 玩具總動員
price: 530 hkd
the zurg finally released
but playing with it is very difficult
ended up not taking a photo with buzz lightyear and put it away
kaiyodo products are getting more and more expensive now
this one costs around 5xx-6xx hkd
its really a purchase for those who truly love it
here are some issues i found:
1. the metal paint easily chips off even though its fully painted
2. the pegs are loose with holes, but the joints themselves are sturdy
3. the missile is heavy, and its hard to hold with just the wrist joint
easier to break it
its also difficult to position the arm with the body at the same time, maybe i havent mastered it yet
4. the paint on the gun handle is too thick, causing it to stick to the gun
it took me a lot of time to remove it, and i had to sand off some of the paint before i could install it successfully
as an additional note, i tried using hot water to soften the paint that was sticking to the gun
the parts are made of hard plastic, so hot water or a hairdryer wont affect them
however, you need to be careful when placing it in the hot water because the energy bars on the sides of the gun handle may be made of stickers
if they are submerged in hot water, they may peel off or get damaged
please be careful
thx for reading🤝🏻
終於出左
但玩得十分唔順
結果未同巴斯合照就收起左
海洋堂d野依家都越黎越貴
呢隻要5xx-6xx hkd
都真係有愛先買得落手
以下係我覺得的問題
1. 全塗裝但很易就花
2. 插輪轉關節位鬆, 輪轉關節本身就好實
3. 枝炮勁重, 只靠手腕關節實斷, 但又好難同時入埋手臂的接位, 可能我未掌握
4. 槍的握柄油漆太厚, 咬死槍身, 拆出黎都花左我好多時間, 之後要打磨走部份漆油先可以安裝成功
呢度補充多少少, 我係浸熱水, 嘗試令咬死的漆容易剝落
本身件部件係硬膠, 熱水或風筒對它無影響
但要就位去浸, 因為握柄再高少少就有條彎既能量bar, 兩邊都有, 目測應該係貼紙黎, 如果浸到熱水應該gg, 我估風筒吹到都死, 大家自己小心
多謝閱覽🤝🏻
=========================================
price: 530 hkd
the zurg finally released
but playing with it is very difficult
ended up not taking a photo with buzz lightyear and put it away
kaiyodo products are getting more and more expensive now
this one costs around 5xx-6xx hkd
its really a purchase for those who truly love it
here are some issues i found:
1. the metal paint easily chips off even though its fully painted
2. the pegs are loose with holes, but the joints themselves are sturdy
3. the missile is heavy, and its hard to hold with just the wrist joint
easier to break it
its also difficult to position the arm with the body at the same time, maybe i havent mastered it yet
4. the paint on the gun handle is too thick, causing it to stick to the gun
it took me a lot of time to remove it, and i had to sand off some of the paint before i could install it successfully
as an additional note, i tried using hot water to soften the paint that was sticking to the gun
the parts are made of hard plastic, so hot water or a hairdryer wont affect them
however, you need to be careful when placing it in the hot water because the energy bars on the sides of the gun handle may be made of stickers
if they are submerged in hot water, they may peel off or get damaged
please be careful
thx for reading🤝🏻
終於出左
但玩得十分唔順
結果未同巴斯合照就收起左
海洋堂d野依家都越黎越貴
呢隻要5xx-6xx hkd
都真係有愛先買得落手
以下係我覺得的問題
1. 全塗裝但很易就花
2. 插輪轉關節位鬆, 輪轉關節本身就好實
3. 枝炮勁重, 只靠手腕關節實斷, 但又好難同時入埋手臂的接位, 可能我未掌握
4. 槍的握柄油漆太厚, 咬死槍身, 拆出黎都花左我好多時間, 之後要打磨走部份漆油先可以安裝成功
呢度補充多少少, 我係浸熱水, 嘗試令咬死的漆容易剝落
本身件部件係硬膠, 熱水或風筒對它無影響
但要就位去浸, 因為握柄再高少少就有條彎既能量bar, 兩邊都有, 目測應該係貼紙黎, 如果浸到熱水應該gg, 我估風筒吹到都死, 大家自己小心
多謝閱覽🤝🏻
=========================================
