SHF Dragon Ball Gohan Training Ver 龍珠 孫悟飯 訓練服 改造
material: DF Vegito, SHF SROE Goku core, belt, boots
finally, the gohan training ver is completed
actually the mold was finished in 2020 late oct
just becoz i was lazy and could not find out the color of body
therefore there is no progress till today
after the painting of chest, wrist and boots, i figured out the df vegito body color is also ok😂
thanks god🙏🏻
here are the detail steps
1. detach the chest from body and split into two parts
2. use the cutter/modeler's knife cut away the tee part
3. use the putty (tamiya epoxy putty) to mold the pectoral and abs
4. drill a hole on the df vegito belt and plug the sroe knot into the belt
5. use the putty to mold the boots
6. paint the parts
7. wrists, belt, upper part of boots -> mr color 92 (black, 2) : 108 (red, 6)
8. socks -> mr color 92 (black, 1) : 107 (white, 8)
9. soles -> mr color 92 (black, 1) : 107 (white, 5)
10. shoes -> mr color 92
11. pectoral and abs -> citadel ungor fresh (4) : acrylicos vallejo 70.928 (light flesh, 4)
thx for reading🤝🏻
終於, 訓練服悟飯完成了
事實上, 塑型部份在2020十月尾時完成
不過主因自己太懶和找不到身體用的藍色/紫色
所以一直都沒有進展...
不過當完成了胸, 腕, 靴的上面部份的塗裝及假組時
發現魔契的比古洛顏色真是絕配
不用重塗身體, 太好了🙏🏻
以下是詳細的改造步驟
1. 分拆上胸部份及砌開到前後兩件
2. 用筆刀批走橙衫的部份
3. 用混合筆地 (tamiya epoxy putty) 塑造胸肌及腹肌
4. 鑽一個小窿到df 比古洛的腰帶, 及裝上sroe的腰帶的繩結部件
5. 用畢合幫靴子的上半部份塑型
6. 幫所以有部件上色
7. 腕, 腰帶, 靴子的上半part部件 -> mr color 92 (black, 2) : 108 (red, 6)
8. 襪 -> mr color 92 (black, 1) : 107 (white, 8)
9. 鞋底 -> mr color 92 (black, 1) : 107 (white, 5)
10. 鞋 -> mr color 92
11. 胸肌及腹肌 -> citadel ungor fresh (4) : acrylicos vallejo 70.928 (light flesh, 4)
多謝閱覽🤝🏻
=========================================
=========================================
https://www.facebook.com/siukamadbuyrecord/posts/3398765926894748
=========================================
material: DF Vegito, SHF SROE Goku core, belt, boots
finally, the gohan training ver is completed
actually the mold was finished in 2020 late oct
just becoz i was lazy and could not find out the color of body
therefore there is no progress till today
after the painting of chest, wrist and boots, i figured out the df vegito body color is also ok😂
thanks god🙏🏻
here are the detail steps
1. detach the chest from body and split into two parts
2. use the cutter/modeler's knife cut away the tee part
3. use the putty (tamiya epoxy putty) to mold the pectoral and abs
4. drill a hole on the df vegito belt and plug the sroe knot into the belt
5. use the putty to mold the boots
6. paint the parts
7. wrists, belt, upper part of boots -> mr color 92 (black, 2) : 108 (red, 6)
8. socks -> mr color 92 (black, 1) : 107 (white, 8)
9. soles -> mr color 92 (black, 1) : 107 (white, 5)
10. shoes -> mr color 92
11. pectoral and abs -> citadel ungor fresh (4) : acrylicos vallejo 70.928 (light flesh, 4)
thx for reading🤝🏻
終於, 訓練服悟飯完成了
事實上, 塑型部份在2020十月尾時完成
不過主因自己太懶和找不到身體用的藍色/紫色
所以一直都沒有進展...
不過當完成了胸, 腕, 靴的上面部份的塗裝及假組時
發現魔契的比古洛顏色真是絕配
不用重塗身體, 太好了🙏🏻
以下是詳細的改造步驟
1. 分拆上胸部份及砌開到前後兩件
2. 用筆刀批走橙衫的部份
3. 用混合筆地 (tamiya epoxy putty) 塑造胸肌及腹肌
4. 鑽一個小窿到df 比古洛的腰帶, 及裝上sroe的腰帶的繩結部件
5. 用畢合幫靴子的上半部份塑型
6. 幫所以有部件上色
7. 腕, 腰帶, 靴子的上半part部件 -> mr color 92 (black, 2) : 108 (red, 6)
8. 襪 -> mr color 92 (black, 1) : 107 (white, 8)
9. 鞋底 -> mr color 92 (black, 1) : 107 (white, 5)
10. 鞋 -> mr color 92
11. 胸肌及腹肌 -> citadel ungor fresh (4) : acrylicos vallejo 70.928 (light flesh, 4)
多謝閱覽🤝🏻
=========================================
=========================================
https://www.facebook.com/siukamadbuyrecord/posts/3398765926894748
=========================================