SHF DSS Dragon Ball Super Gotenks Custom 龍珠 超級悟天格斯 改造
DSS Super Gotenks: 139 hkd
SHF body: 134.28 hkd + 30.5 hkd = 164.78 hkd
=========================================
the head sculpt of super gotenks from dss is good
thats y there are so many custom in the internet
the size is quite fit to shf gotenks body
the difficult part is how to connect the dss head with shf body
finally my frd kawah sir shared me about the hot melt glue
1. use the vaseline to protect the target areas, such as neck of shf, neck hole of dss
2. turn on the hot melt glue gun and wait until the glue is in liquid form
3. then add the glue to the neck hole of the dss ssj3 head
4. plug the shf body into that hole and wait, water can be used to cool down
5. finally the clotted adapter done
i did around 10 times of making this adapter, hahaha
although the adapter functions well, but the head is still too heavy
it is difficult to play... sad...
thx for reading🤝
dss 個頭雕其實唔錯, 但可動唔得
所以就有個諗法想將 dss 頭加 shf 身
不過困難既地方在於點樣連接 dss 到 shf 上
之後朋友 kawah sir 提議用熱溶膠
的確成功整到個 adapter 出黎
1. 搽凡士林到要保護既位置, 例如 shf 頸, dss 頭下面果個 joint 位
2. 開著熱溶膠槍, 加熱到 d 熱溶膠接近水狀
3. 之後唧 d 熱溶膠到 dss 頭果個窿度
4. 插上 shf body 再等佢乾
5. 連接器完成
以上步驟我重複左近 10 次先整到個滿意, hahaha
但雖然個頭接上左 shf body, 但真係太重
只可以罰企, 唔好玩, 好難玩... sad...
多謝閱覽🤝
=========================================
=========================================
https://www.facebook.com/siukamadbuyrecord/posts/2133891360048884
=========================================
DSS Super Gotenks: 139 hkd
SHF body: 134.28 hkd + 30.5 hkd = 164.78 hkd
=========================================
the head sculpt of super gotenks from dss is good
thats y there are so many custom in the internet
the size is quite fit to shf gotenks body
the difficult part is how to connect the dss head with shf body
finally my frd kawah sir shared me about the hot melt glue
1. use the vaseline to protect the target areas, such as neck of shf, neck hole of dss
2. turn on the hot melt glue gun and wait until the glue is in liquid form
3. then add the glue to the neck hole of the dss ssj3 head
4. plug the shf body into that hole and wait, water can be used to cool down
5. finally the clotted adapter done
i did around 10 times of making this adapter, hahaha
although the adapter functions well, but the head is still too heavy
it is difficult to play... sad...
thx for reading🤝
dss 個頭雕其實唔錯, 但可動唔得
所以就有個諗法想將 dss 頭加 shf 身
不過困難既地方在於點樣連接 dss 到 shf 上
之後朋友 kawah sir 提議用熱溶膠
的確成功整到個 adapter 出黎
1. 搽凡士林到要保護既位置, 例如 shf 頸, dss 頭下面果個 joint 位
2. 開著熱溶膠槍, 加熱到 d 熱溶膠接近水狀
3. 之後唧 d 熱溶膠到 dss 頭果個窿度
4. 插上 shf body 再等佢乾
5. 連接器完成
以上步驟我重複左近 10 次先整到個滿意, hahaha
但雖然個頭接上左 shf body, 但真係太重
只可以罰企, 唔好玩, 好難玩... sad...
多謝閱覽🤝
=========================================
=========================================
https://www.facebook.com/siukamadbuyrecord/posts/2133891360048884
=========================================