SHF Iron Spider Custom 鐵甲蜘蛛 改造
price: 485 hkd
claw: 200 hkd (MUGEN Workshop)
=========================================
全個infinity war系列都係錯, 蜘蛛俠當然唔會例外
結果爪係要另買dlc, 但仲有其他呢? 可惜無人出
近日由於mafex就快殺到, 我又唔想追多隻
唯有的起心肝用有限的能力盡量補完一下
所以就自己試造金色護腕取代原來的發射器
以下係製作步驟
1. 先cut遮蓋膠紙以保護義手 (ko shf gg), 形狀可參考圖片
2. 用雙星混合畢地逐少逐少搓, 推等動作, 重複推到成形 (由於畢地混合完好黐手, 所以我會準備一條濕毛巾用黎抹手同令手指唔會乾)
3. 等乾左後就可以用筆刀挑起d膠紙, 護腕同膠紙就可以甩開義手
4. 再用細鉗撕走膠紙就完成 (畢地乾左後就唔會黐上膠紙上面, 所以唔需要擔心整唔走膠紙)
5. 先用800水磨沙紙, 再用1200打磨
6. 我直接用gundam marker金色黎上色, 再噴光澤
7. 浸熱水後就可以拆除iron spider對手的ball joint同發射器落黎, 之後就套上新製既護腕
完成👏👏👏
the whole shf infinity war series is wrong, of course the spider man will not be the exception
so the claws are dlc but seems that no one will take care the others
and mafex iron spider is coming, i decide to make the stuffs by myself
here are the steps
1. cut the masking tape and paste them to the arms (ko shf gg), the shape can be found in pics
2. mix the tamiya epoxy putty to sculpt the metal bracers shape (as the putty is so sticky after mixed, i will prepare a wet towel to keep my hand clean for sculpting
3. use the pen knife to detach the masking tape from the arms
4. use the tweezers to remove the masking tape from the model (the putty will not stick to the tape after it is dry out)
5. sand the model by 800, and then 1200
6. i paint by gundam marker - gold, after that add the cloating by mr super clear gloss
7. detach the original bracers by dipping the arms into the hot water and we can put the new bracers on
Finish👏👏👏
=========================================
https://www.facebook.com/siukamadbuyrecord/posts/1988828181221870
=========================================
price: 485 hkd
claw: 200 hkd (MUGEN Workshop)
=========================================
全個infinity war系列都係錯, 蜘蛛俠當然唔會例外
結果爪係要另買dlc, 但仲有其他呢? 可惜無人出
近日由於mafex就快殺到, 我又唔想追多隻
唯有的起心肝用有限的能力盡量補完一下
所以就自己試造金色護腕取代原來的發射器
以下係製作步驟
1. 先cut遮蓋膠紙以保護義手 (ko shf gg), 形狀可參考圖片
2. 用雙星混合畢地逐少逐少搓, 推等動作, 重複推到成形 (由於畢地混合完好黐手, 所以我會準備一條濕毛巾用黎抹手同令手指唔會乾)
3. 等乾左後就可以用筆刀挑起d膠紙, 護腕同膠紙就可以甩開義手
4. 再用細鉗撕走膠紙就完成 (畢地乾左後就唔會黐上膠紙上面, 所以唔需要擔心整唔走膠紙)
5. 先用800水磨沙紙, 再用1200打磨
6. 我直接用gundam marker金色黎上色, 再噴光澤
7. 浸熱水後就可以拆除iron spider對手的ball joint同發射器落黎, 之後就套上新製既護腕
完成👏👏👏
the whole shf infinity war series is wrong, of course the spider man will not be the exception
so the claws are dlc but seems that no one will take care the others
and mafex iron spider is coming, i decide to make the stuffs by myself
here are the steps
1. cut the masking tape and paste them to the arms (ko shf gg), the shape can be found in pics
2. mix the tamiya epoxy putty to sculpt the metal bracers shape (as the putty is so sticky after mixed, i will prepare a wet towel to keep my hand clean for sculpting
3. use the pen knife to detach the masking tape from the arms
4. use the tweezers to remove the masking tape from the model (the putty will not stick to the tape after it is dry out)
5. sand the model by 800, and then 1200
6. i paint by gundam marker - gold, after that add the cloating by mr super clear gloss
7. detach the original bracers by dipping the arms into the hot water and we can put the new bracers on
Finish👏👏👏
=========================================
https://www.facebook.com/siukamadbuyrecord/posts/1988828181221870
=========================================